Tutorial 5: Electric and pneumatic circuits
In this tutorial you will:
- Integrate electric and pneumatic components.
- Make and modify connections between component ports.
- Play with different configurations using the given components.
Start by loading the tutorial system into the workspace, and then navigate through the components in the tree and the scene to explore them.
To be able to follow this tutorial, make sure you have already done the Basic Tutorial 4.
The system includes an assembly including a table with a compressor, a DC 24V power supply, a single-acting cylinder, a double-acting cylinder, a 3/2 way solenoid activated directional valve, a 5/3 way solenoid activated directional valve and three pushbuttons.
Build a circuit
The first circuit you are going to build is the one represented in the diagram below. This circuit shows how to use a solenoid acted valve using an electric pushbutton.
First, you will make the pneumatic connections, left side of the diagram. The pneumatic compressor 'COMPRESSOR' will be connected to the 3/2 way directional valve 'Y01' and this one to the single-acting cylinder 'C01'. 'COMPRESSOR' has a pneumatic output port called 'out', and you will connect it directly to 'Y01' input port 'p1'. Then you will connect the 'C01' input port 'p1' to the 'Y01' valve output port 'p2'.
Once the pneumatic connections are done, you can continue with the electric connections. Connect the 'S01' input port 'x1' to the 'PS01.dc_p' port, then connect the 'Y01' solenoid inputs 'x11' and 'x12' to the button's 'x2' output and the 'PS01' ground output 'dc_n' respectively.
The circuit is now ready to test. We should expect that the 'C01' cylinder will expand when we press the 'S01' button, and retract when we release it. Click on start and see if it works.
If you reset the emulation the system will be reset and the cylinder will go back to its retracted position.
Time to play!
Now it is time to play and build your configurations using the different cylinders and valves you have in the system.
Can you make the necessary connections to move the double-acting cylinder using the 5/3 way directional valve?